SIGNAGE according to ANSI /BHMA A 156.19 (Low energy)
50±12"
50±12"
34-48"
50±12"
C
L
Apply to both sides of the door.
When using a wall switch,
apply to both sides of the door.
Apply the push decal to the push
side and the pull decal to the pull
side of the door.
Push plate
PRESS
TO OP
EN
21-24-005
21-24-005
PUSH TO
OPERATE
21-24-006
PUSH TO
OPERATE
21-24-006
PULL TO
OPERATE
21-24-008
ACTIVATE
SWITCH TO
OPERATE
21-24-007
ACTIVATE
SWITCH TO
OPERATE
21-24-007
A
B
E
P
RESS
TO OPE
N
C
D
75-20-102
75-20-102
Surface Applied shown
If problem oc-
curs
Action
Check that all required signage is applied and intact. Mandatory indicates that the signage is required
by European directives and equivalent national legislation outside the European Union.
Dual Side “AUTOMATIC DOOR / CAUTION”
Operator designed for disabled people:
Recommended, if applicable (applied to both sides of the door).
Dual Side “Activate Switch to Operate”
Push side “PUSH TO ACTIVATE”
Pull side “PULL TO ACTIVATE”
Activation by disabled people: Recommended, if applicable.
Contact your ASSA ABLOY service representative. For contact information, see last page.=
13Issue 2018-03-281007717-en-US-3.0