FUNCTION AND VISUAL INSPECTION
5
6
9
11
7
12
8
4
1
2
FUNCTION
ON
OFF
HOLD
10
POWER
ON
OFF
3
13
Surface Applied shown
CLEANING
The best way to remove dust and dirt from the ASSA ABLOY SW200 is to use water and a soft cloth or a sponge.
A gentle detergent may be used. To maintain the quality of the surface treatment, the surfaces should be cleaned
once/four months period. The cleaning should be documented. To avoid damages to the profiles the brushes/weather
stripping must be vacuum-cleaned weekly.
• Do not expose windows, doors or profiles to alkalis. Both aluminium and glass are sensitive to alkalis.
• Do not clean with high pressure water. Operator, programme selector and sensor may be damaged and water may
enter the profiles.
• Do not use polishing detergent.
• Do not scrub with materials like Scotch-brite, as this will cause mechanical damage.
9Issue 2018-03-281007717-en-US-3.0
To Next Page
Loading...
