DRV-24 frequency inverters Product Overview
8
2 (AO1, AO2*) 0~10V/0~20mA
* AO2 for devices with power input ≥4kW
4 common inputs, the Max. frequency: 1kHz;
1 high speed input, the Max. frequency:
50kHz
2 programmable relay outputs
RO1A NO, RO1B NC, RO1C common terminal
*RO2A NO, RO2B NC, RO2C common terminal
Contact capacity: 3A/AC250V
* for devices with power input ≥4kW
Temperature of the
running
environment
-10~50°C, derate 1% for every additional 1℃
when above 40℃
Standard embedded DC reactor for the
inverters (≥18.5kW)
Wall and rail installation of the
inverters(single phase 220V/three phase
380V, ≤2.2KW)
Wall and flange installation of the
inverters(three phase 380V, ≥4KW)
Standard for the inverters≤37kW and optional
for the inverters of 45~110kW
IP20
Note: The inverter with plastic casing should
be installed in metal distribution cabinet,
which conforms to IP20 and of which the top
conforms to IP3X.
Embedded C3 filters for the inverters(three
phase 380V, ≥4kW and three phase 220V,
≥1.5kW) ; external C2 filter is optional for all
series;
Optional filter: meet the degree requirement
of IEC61800-3 C2, IEC61800-3 C3
Meet the requirement of CE
To Next Page
Loading...
General