Astraada DRV-24 - Keypad Operation Procedure; Keypad Introduction

Astraada DRV-24 frequency inverters Keypad operation procedure
21
4 Keypad Operation Procedure
4.1 Keypad introduction
The keypad is used to control Astraada DRV-24 series inverters, read the state data and adjust
parameters.
Figure 4-1 Film keypad
Figure 4-2 External keypad
Note:
1. The film keypad is standard for the inverters of 1PH 230V/3PH 400V(≤2.2kW). The external
keypad is standard for the inverters of 3PH 400V (≥4kW).
2. The external keypads are optional (including the external keypads with and without the
function of parameter copying).
Seria
l No.
Name
Description
1
State
LED
RUN/TUNE
LED off means that the inverter is in the
stopping state; LED blinking means the
inverter is in the parameter autotune
state; LED on means the inverter is in the