Disclaimer
ASUS is not responsible for direct, indirect, intentional or unintentional damages resulting from improper installation and operation.
Safety precautions
• Keep liquids or moisture away from your Notebook PC before installing or removing any components.
• Ensure to place your Notebook PC on a stable surface before installing or removing any components.
• Detach the clip or flap before removing the signal cables to prevent damage.
• Disconnect the power plug by pulling the plug evenly to avoid damage. Ensure to connect the signal cables in the correct orientation.
• Disconnect all power cables and remove the battery pack (if applicable) before cleaning your Notebook PC with liquid detergent to avoid risk of electric shock.
• Disconnect all power cables and remove the battery pack (if applicable) before installing or removing any components. Ensure to read and follow the instructions in the manual.
• Before handling components, use a grounded wrist strap or touch a safely grounded object to avoid damaging them due to static electricity.
• Keep liquids or moisture away from your Notebook PC to avoid short circuits.
• Hold components by the edges to avoid touching the ICs.
• Ensure to properly install all the components before connecting the AC power.
• Do not use power adapters or batteries from other devices to reduce the risk of injury to persons due to fire or explosion. Use only certified power adapters or batteries supplied by
the manufacturer or authorized retailers.
• Ensure to install the correct screw models on your Notebook PC to prevent damage.
To Next Page
Loading...
