Asus RS700-E9-RS4 - Page 35

2-11
ASUS RS700-E9 Series
Toinstalla2.5”hot-swapSATA/SASstoragedevice:
1. Push the spring lock to the right (A) then pull the tray lever outward (B) to release the
drive tray. The drive tray ejects slightly after you pull out the lever.
2. Firmly hold the tray lever and pull the
drive tray out of the bay.
3. Placethedrivetrayonaatand
stable surface.
4. PreparetheSATA/SASstorage
device and the bundled set of
screws.
Spring lock
Tray lever