Chapter 2: Hardware Information
2-20
7. Push the tray lever until it clicks and
secures the tray in place.
The tray is correctly placed when
its front edge aligns with the bay
edge.
8. Repeat steps 1 to 7 to install the
other storage devices.
Wheninstalled,theSATA/SAS/NVMeconnectoronthestoragedeviceconnectstothe
SATA/SAS/NVMeinterfaceonthebackplane.
6. Insert the tray and storage device
assembly all the way into the depth
of the bay until just a small fraction
of the tray edge protrudes.
5. Place the SATA/SAS storage device
into the storage device tray then
secure it with four screws.
To Next Page
Loading...
