AT&T CL82207 - Send Call to Answering System; End Call

Smart call blocker
97
Screen calls without numbers
Send call to answering system
1. When the telephone starts ringing, and
the screen displays Screened call, press
or /SPEAKER to pick up the
call. If you have turned on the caller ID announce
feature, the telephone announces “You have a
call from...
up the call, the telephone announces “To answer
the call, press 1. To send this call to the answering
system, press 4. To repeat these options, press *”.
2. Press 4 to send the caller to the answering
system.
Notes:
 The caller is sent to the answering system and can leave a message even if the answering system
is off.
 To turn on or off caller ID announce, see page 20.
 When the telephone is ringing, you can press OFF/CANCEL to mute the ringer temporarily.
End call
1. When the telephone starts ringing, and
the screen displays Screened call, press
or
/SPEAKER to pick up the call. If you have turned
on the caller ID feature, the telephone announces
“You have a call from...
you picked up the call, the telephone announces
“To answer the call, press 1. To send this call to the
answering system, press 4. To repeat these options,
press *”.
2. If you do not want to take the call, press
to end
the call.
HANDSET 1
1 New message
10/15
10:01
AM
ANS ON
Screened call
PRIVATE CALLER
10/15
10:01
AM
Screened call
PRIVATE CALLER
10/15
10:01
AM
HANDSET 1
1 New message
10/15
10:01
AM
ANS ON