Directory
48
Create directory entries
Create a new directory entry
1. Press MENU/SELECT in idle mode to enter the main
menu.
2. Press
CID or DIR to scroll to Directory, then press
MENU/SELECT.
3. Press
CID or DIR to highlight Add contact.
4. Press
MENU/SELECT.
5. Use the dialing keys to enter a telephone number (up
to 30 digits) when prompted.
Press CID or DIR
or right.
Press MUTE/DELETE to erase a digit.
Press and hold MUTE/DELETE to erase all digits.
Press and hold REDIAL/PAUSE to enter a
three-second dialing pause (a p appears).
-OR-
Copy a number from the redial list by pressing
REDIAL/
PAUSE, then CID or DIR, or pressing
REDIAL/
PAUSE repeatedly to locate the number. Press
MENU/SELECT to copy the number.
6. Press
MENU/SELECT to move on to the name.
The screen shows Number already saved if the
number is already in the directory. You cannot save
the same number twice.
7. Use the dialing keys to enter a name (up to 15
characters) when prompted. Each time you press a
key, the character on that key appears. Additional key
presses produce other characters on that key. See the
chart on next page.
Press CID or DIR
Press 0 to add a space.
Press MUTE/DELETE to erase a character.
Press and hold MUTE/DELETE to erase all characters.
Press TONE to change the next letter to upper or lower case.
Smart call blk
>Directory
Review
>Add contact
ENTER NUMBER
888-883-2445
_
Saved
ENTER NAME
Robert Brown_
To Next Page
Loading...
