AT&T CL82207 - Call Transfer Using Intercom

Multiple handset use
40
Call transfer using intercom
Use the intercom feature to transfer an outside call to another
system device. You can also share an outside call with another
system device.
To transfer or share an outside call using intercom:
1. During the call, press MENU/
SELECT.
2. Press 
CID or DIR to scroll to Intercom and press
MENU/SELECT.
3. If you have a two-handset system and no other registered
devices, your handset screen shows Calling other handset.
-OR-
If you have more than two handsets and/or cordless headset(s)/
speakerphone(s), your screen shows INTERCOM TO:. Use the
dialing keys to enter a specific device number (1-9 for handsets
1-9, TONE
followed by 0-2 for handsets 10-12, or TONE
followed by
#
for all devices), or press CID or DIR to scroll
to the desired handset and press MENU/SELECT. Your handset
screen shows Calling HANDSET X, or Calling all handsets.
4. When the destination handset picks up, your handset shows
Intercom and the outside call is put on hold. You have the
following options:
 You can transfer the call. Press MENU/SELECT, then press
CID or DIR to scroll to Transfer. Press MENU/SELECT again.
The handset shows Call transferred. The other handset
automatically connects to the outside call.
 You can let the other handset join you on the outside call in
a three-way conversation. Press MENU/SELECT. Press CID or
DIR to highlight Share call, then press MENU/SELECT.
 You can end the intercom call and continue the outside call
with your handset. Press on your handset (the
ended intercom call party hears four beeps).