AT&T CL82207 User Manual

Answering system
107
Answering system settings
Call screening
Use this feature to choose whether incoming messages can be
heard over the speaker when they are being recorded. If you
turn call screening on, you hear the incoming message. While
monitoring an incoming message, you can answer the call by
pressing
on the handset.
To change the setting:
1. When the handset is in idle mode, press
MENU/
SELECT to enter the main menu.
2. Press 
CID or DIR to scroll to Answering sys,
then press MENU/SELECT.
3. Press 
CID or DIR to scroll to Ans sys setup,
then press MENU/SELECT.
4. Press
MENU/SELECT to select Call screening.
5. Press 
CID or DIR to choose On or Off.
6. Press
MENU/SELECT to save the setting. You hear
a confirmation tone.
Note: For more information on call screening, see page 115.
Voice guide
>Ans sys setup
> Call screening
# of rings

CALL SCREENING
>On

AT&T CL82207 Specifications

General

Brand	AT&T
Model	CL82207
Category	Cordless Telephone
Language	English