Installation
Install the telephone base close to a telephone jack and a power outlet
surface or vertically mounted on the wall (see page 13). For optimum
range and better reception, place the telephone base in a central and open
location.
If you subscribe to high-speed Internet service (DSL - digital subscriber line)
and caller ID problems caused by DSL interference. Please contact your DSL
Your product may be shipped with protective stickers covering the handset
and telephone base displays - remove them before use.
For customer service or product information, visit our website at
www.telephones.att.com or call 1 (800) 222-3111. In
Canada, dial 1 (866) 288-4268.
Avoid placing the telephone base and charger too close to:
Communication devices such as television sets, VCRs, or other cordless
telephones.
Excessive heat sources.
Excessive dust sources such as a workshop or garage.
Excessive moisture.
Extremely low temperature.
Mechanical vibration or shock such as on top of a washing machine or
workbench.
Getting started
See pages
9-11 for easy
instructions.
You must install and
charge the battery
before using the
telephone.
STOP!
1
To Next Page
Loading...
Need help?
General
