Telephone operation
36
Options while on calls
Blind transfer
device or any device without notifying them.
To transfer an outside call directly without
notifying the desired device:
1. During the call, press MENU/
SELECT.
2. Press
CID or DIR to scroll to Transfer and then
press MENU/SELECT.
If you have a two-handset system and no other
registered devices, the outside call is put onhold
and your handset shows Transferring call....
The other handset rings and shows Transfer
from other handset.
If you have other registered device(s) or
more than two handsets, your screen shows
TRANSFER TO:. Use the dialing keys to enter
a specific device number (1-9 for handsets 1-9,
TONE followed by 0-2 for handsets 10-12, or
TONE followed by # for all devices), or press CID or DIR to
scroll to the desired device and press
MENU/SELECT. The outside call is put on hold and your
handset screen shows Transferring call... or Transferring
call to all.... The other device rings and shows Transfer from
HANDSET X (HANDSET represents the handset name, X
represents the handset number).
3. To answer the call on the destination handset, press
, /SPEAKER, or any dialing key (0-9, TONE or
#). The initiating handset shows Call transferred and goes to
idle mode.
Notes:
To cancel the transfer and return to the external call before the blind transfer call is answered,
press , or /SPEAKER on your handset.
If the other device does not answer the transfer within 30 seconds, the transfer ends and the
initiating device rings while showing No response to transfer. If it does not pick up within 30
seconds, the device returns to idle mode and the outside call ends.
Phone 0:00:12
6:30
AM
8/06
>Equalizer
Transfer
TRANSFER TO:
>Handset 2
To Next Page
Loading...
