AT&T CL82207 User Manual

Answering system
Answering system settings
Remote access code
To access your answering system remotely from any touch-tone
phone, you need to enter a two-digit number (00-99). By default,
the remote access code is 19.
To change the remote access code:
1. When the handset is in idle mode, press
MENU/
SELECT to enter the main menu.
2. Press 
CID or DIR to scroll to Answering sys,
then press MENU/SELECT.
3. Press 
CID or DIR to scroll to Ans sys setup,
then press MENU/SELECT.
4. Press 
CID or DIR to scroll to Remote code,
then press MENU/SELECT.
5. Use the dialing keys to enter a two-digit number.
Press
MUTE/DELETE to backspace and delete a
digit.
6. Press
MENU/SELECT to save the setting. You hear a
confirmation tone.

Play messages
>Answering sys

Voice guide
>Ans sys setup

REMOTE CODE
19
109

AT&T CL82207 Specifications

General

Brand	AT&T
Model	CL82207
Category	Cordless Telephone
Language	English