Smart call blocker
85
Call block settings
Star name list
There are many organizations like schools, medical offices,
and pharmacies that use robocalls to communicate important
information to you. Robocall uses an autodialer to deliver pre-
recorded messages. By entering the name of the organizations
into the star name list, it ensures these calls will ring through
when you only know the caller names but not their numbers.
If the first 15 characters of the incoming caller ID’s name match
a name saved in your star name list, the call will get through and
ring. The star name list stores up to 10 names.
Add a star name entry:
1. Press CALL BLOCK on the handset when it is not in use.
-OR-
Press MENU/
SELECT to enter the main menu when the handset
is not in use. Press CID or DIR to scroll to Smart call blk, then
press MENU/SELECT.
2. Press
CID or DIR to scroll to Star name list, and then press
MENU/SELECT.
3. Press
CID or DIR to scroll to Add new entry, then press
MENU/SELECT.
4. When the screen displays ENTER NAME, use
the dialing keys to enter a name (up to 15
characters). Press a key repeatedly until the
every word is capitalized.
Press CID or DIR
Press 0 to add a space.
Press MUTE/DELETE to erase a character.
Press and hold MUTE/DELETE to erase all characters.
Press TONE to change the next letter to upper or lower case.
5. Press
MENU/SELECT to store your star name entry. The display
shows Name already saved if the name is already in the star
name list. You cannot save the same name twice.
ENTER NAME
Bayriver Eleme_
To Next Page
Loading...
Need help?
General
