Getting started
11
Battery installation and charging
Step 3
Charge the handset by placing it face
forward in the telephone base or charger.
The CHARGE light on the handset is on
during charging.
following a power outage, the handset will prompt
you to set the date and time. For instructions,
see Set date/time on page 18. To skip setting
the date and time, press
on the
handset.
SET DATE
MM/DD/YY
SET TIME
HH:MM --
IMPORTANT INFORMATION
Use only the supplied rechargeable battery or replacement battery
(model BT183342/BT283342). To order, visit our website at
www.telephones.att.com or call 1 (800) 222-3111. In
Canada, dial
1 (866) 288-4268.
If you do not use the handset for a long time, disconnect and
remove the battery to prevent possible leakage.
To Next Page
Loading...
Need help?
General
