9
Handset settings
Use the menu to change the telephone settings.
1. Press
MENU/SELECT on the handset when it is not in use to
enter the main menu.
2. Press
qCID or pDIR to scroll to the feature to be changed.
When scrolling through the menu, the > symbol indicates the
chosen menu item.
3. Press
MENU/SELECT to select the chosen item.
NOTE: Press OFF/CANCEL to cancel an operation, back up to the previous menu or exit
the menu display. Press and hold OFF/CANCEL to return to idle mode.
Ringer volume
You can set the ringer volume level to one of six levels or turn the ringer off.
When the ringer is off, appears on the screen.
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Use
qCID or pDIR to scroll to Ringers, then press MENU/SELECT.
3. Press MENU/SELECT again to select Ringer volume.
4. Press
qCID or pDIR to sample each volume level.
5. Press MENU/SELECT to save your preference.
NOTE: The handset ringer volume also determines the ringer volume for intercom calls.
Ringer tone
You can choose one of ten ringer tones.
1. Press
MENU/SELECT in idle mode to enter the main menu.
2. Use
qCID or pDIR to scroll to Ringers, then press MENU/SELECT.
3. Press
qCID or pDIR to scroll to Ringer tone, then press MENU/SELECT.
4. Press
qCID or pDIR to sample each ringer tone.
5. Press
MENU/SELECT to save your preference.
NOTE: If you turn off the ringer volume, you will not hear ringer tone samples.
Telephone settings
>Play messages
Answering sys
p
q
To Next Page
Loading...
Need help?
General
