Directory
Speed dial
The telephone system has nine speed dial locations (2-9, 0) and a voicemail
access location 1 where you can store the telephone numbers you wish to
dial more quickly. You can store up to 30 digits in each location. Speed dial
assignments can only be selected from the existing directory entries. The
voicemail access number must be manually entered. In the directory, speed
dial locations are indicated by their number on the bottom right hand corner
of the entry.
Assign a speed dial number
When the telephone is idle, press MENU/SELECT.
Press qCID or pDIR to scroll to Directory. Press MENU/SELECT.
Press qCID or pDIR to scroll to Speed dial. Press MENU/SELECT.
Press qCID or pDIR to choose your desired speed dial location (0 or 2-9),
then press MENU/SELECT. The screen briefly shows Copy from Directory...
then displays the directory list.
Press qCID or pDIR to scroll to the phone number you wish to assign to the
selected speed dial location.
Press MENU/SELECT to save the setting.
Assign your voicemail speed dial number
To assign your voicemail speed dial number to location 1, see page 12 or
page 19
. The voicemail speed dial entry does not show in the bottom
right corner.
Make a call using speed dial
When in idle mode, press and hold the dialing key (0 or 2-9) corresponding to
the assigned location you wish to call.
Check your voicemail using speed dial
When in idle mode, press and hold 1 to dial the voicemail number you
have set.
1.
2.
3.
4.
5.
6.
36
To Next Page
Loading...
Need help?
General
