11
Telephone settings
Handset settings
LCD language
You can select the language used for all screen displays.
1. Press
MENU/SELECT in idle mode to enter the main menu.
2.
Use qCID or pDIR to scroll to Settings, then press MENU/SELECT.
3. Press
MENU/SELECT to choose LCD language.
4. Press
qCID or pDIR to highlight English, Français or Español, then press
MENU/SELECT. The screen prompts Set English/Français/Español as
LCD language?
5.
Press MENU/SELECT to save your preference.
NOTE: If you accidentally change the LCD language to French or Spanish, you can reset it back
to English without going through the French or Spanish menus. Press MENU/SELECT on the
handset in idle mode, then enter 364#. There is a confirmation tone.
Voice language
You can select the voice language (English or French) to be used for the voice
prompts in your answering system or caller ID announce.
1. Press
MENU/SELECT in idle mode to enter the main menu.
2.
Use qCID or pDIR to scroll to Settings, then press MENU/SELECT.
3.
Use qCID or pDIR to scroll to Voice language, then press MENU/SELECT.
4. Press MENU/SELECT to choose Answering sys, then press MENU/SELECT.
-OR-
Use qCID or pDIR to scroll to Caller ID annc, then press MENU/SELECT.
5. Press qCID or pDIR to choose English or Français, then press MENU/SELECT
to confirm your selection. You hear a confirmation tone.
To Next Page
Loading...
Need help?
General
