AT&T CL83143 Abridged User Manual

Telephone operation
26
Options while on calls
Blind transfer
While on an outside call, you can transfer the call to a specific device or any
device without notifying them.
To transfer an outside call from a cordless handset:
1. During the call, press MENU/SELECT.
2. Press MENU/SELECT to choose Transfer.
If you have one handset, the outside call is put on hold and your handset
shows Transferring call... The telephone base rings and shows
Transfer from HANDSET X.
If you have more than one handset, your screen shows TRANSFER TO:
Use the dialing keys to enter a specific device number (0 for the telephone
base, 1-9 for handsets 1-9, TONE followed by 0-2 for handsets 10-12, or
TONE followed by # for all devices), or press qCID or pDIR to scroll to the
desired device and press MENU/SELECT. The outside call is put on hold and
your handset screen shows Transferring call... or Transferring call to all...
The other device rings and shows Transfer from HANDSET X (HANDSET
represents the handset name, X represents the handset number).
3. To answer the call on the destination handset, press PHONE/FLASH or
/SPEAKER. To answer the call on the telephone base, press /SPEAKER.
The initiating handset shows Call transferred and goes to idle mode.
To transfer an outside call from the telephone base:
1. During the call, press MENU/SELECT.
2. Press MENU/SELECT to choose Transfer.
If you have one handset, the outside call is put on hold and the telephone
base shows Transferring call... The handset rings and shows Transfer
from BASE 0 (BASE represents the base name).
If you have more than one handset, the telephone base shows TRANSFER
TO: Use the dialing keys to enter a specific handset number (1-9 for
handsets 1-9, TONE followed by 0-2 for handsets 10-12, or TONE
followed by
#
for all handsets), or press qCID or pDIR to scroll to the
desired handset and press MENU/SELECT. The outside call is put on hold
and the telephone base shows Transferring call... or Transferring call to
all... The other handset(s) rings and shows Transfer from BASE 0 (BASE
represents the base name).
3. To answer the call on the destination handset, press PHONE/FLASH or
/SPEAKER. The telephone base shows Call transferred and goes to
idle mode.
•
•
•
•

AT&T CL83143 Specifications

General

Brand	AT&T
Model	CL83143
Category	Cordless Telephone
Language	English