Telephone settings
16
Telephone base settings
Use the menu to change the telephone settings.
1. Press MENU/SELECT on the telephone base when it is not
in use to enter the main menu.
2. Press qCID or pDIR to scroll to the feature to be changed.
When scrolling through the menu, the > symbol indicates
the selected menu item.
3. Press MENU/SELECT to select the highlighted item.
NOTE: Press CANCEL to cancel an operation, back up to the previous menu or exit the menu
display. Press and hold CANCEL to return to idle mode.
Ringer volume
You can set the ringer volume level to one of six levels or turn the ringer off.
When the ringer is off, appears on the screen.
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Use
qCID or pDIR to scroll to Ringers, then press MENU/SELECT.
3. Press MENU/SELECT again to select Ringer volume.
4. Press
qCID or pDIR to sample each volume level.
5. Press MENU/SELECT to save your preference.
NOTE: The telephone base ringer volume also determines the ringer volume for intercom calls.
Ringer tone
You can choose one of ten ringer tones.
1. Press
MENU/SELECT in idle mode to enter the main menu.
2. Use
qCID or pDIR to scroll to Ringers, then press MENU/SELECT.
3. Press qCID or pDIR to scroll to Ringer tone, then press MENU/SELECT.
4. Press qCID or pDIR to sample each ringer tone.
5. Press
MENU/SELECT to save your preference.
NOTE: If you turn off the ringer volume, you will not hear ringer tone samples.
>Play messages
Answering sys
p
q
To Next Page
Loading...
Need help?
General
