Answering system
40
Answering system settings
Using the telephone base:
1. When the telephone base is in idle mode, press MENU/SELECT to enter the
main menu.
2. Press
qCID or pDIR to scroll to Answering sys, then press MENU/SELECT.
3.
Press MENU/SELECT again to select Announcement.
4.
Press MENU/SELECT again to select Play annc and play the announcement.
5. While the announcement is playing, press
X/DELETE to delete the
announcement. The system announces “Announcement deleted”.
When your announcement is deleted, the system answers calls with the default
announcement described on the previous page. You cannot delete the default
announcement.
Answer on/off
By default, the answering system is on and ready to record messages. You can
turn the answering system off, but if you do so, the answering system does not
answer calls and record messages.
To turn the answering system on or off:
Using a cordless handset:
1. When the handset is in idle mode, press
MENU/SELECT to enter the main menu.
2. Press
qCID or pDIR to scroll to Answering sys, then press MENU/SELECT.
3. Press
qCID or pDIR to scroll to Answer ON/OFF, then press MENU/SELECT.
4. Press
qCID or pDIR to highlight On or Off, then press MENU/SELECT to save
the setting. You hear a confirmation tone.
When the answering system is on, the handset shows ANS ON.
Using the telephone base:
Press /ANS ON/OFF to turn the answering system
on or off. If the answering system is turned on, it
announces, “Calls will be answered.” If the answering
system is turned off, it announces, “Calls will not
be answered.”
•
To Next Page
Loading...
Need help?
General
