Multiple handset use
31
Push-to-talk (PTT)
Using the telephone base:
1. There are a few ways to begin a PTT call to a single handset. When the
telephone base is not in use:
If you have one handset, press and hold PTT.
If you have more than one handset, press PTT. Use the dialing keys to
enter the destination handset number.
2. Press and hold PTT.
3. Release PTT after speaking.
4. To end the PTT call, press CANCEL.
PTT call to multiple devices
When there are multiple handsets registered to the phone system, PTT supports
one-to-group calls. PTT supports a maximum of one-to-five calls when one to
five handsets are registered, and a maximum of one-to-four calls when six or
more handsets are registered. The first four registered handsets will be able to
use this feature. Other handsets can only use PTT for one-to-one calls.
Using a cordless handset:
1.
Press and hold PUSH TO TALK until the handset shows Connecting to group...
When the connection is made, both the caller and the destination parties hear
a beep. The speakerphones on all other devices automatically activate.
2. You need to
press and hold PUSH TO TALK when you want to speak. Speak
towards the handset. Your voice is broadcast to all devices.
3. Release
PUSH TO TALK after speaking.
4.
Any device can reply (see Answer a PTT call on page 32).
Using the telephone base:
1.
Press and hold PTT until the screen shows Connecting to group...
When the connection is made, both the caller and the destination parties hear
a beep. The speakerphones on all other devices automatically activate.
2. You need to
press and hold PTT when you want to speak. Speak towards the
telephone base. Your voice is broadcast to all devices.
3. Release
PTT after speaking.
4.
Any handset can reply (see Answer a PTT call on page 32).
•
•
To Next Page
Loading...
Need help?
General
