19
Telephone settings
Telephone base settings
Caller ID announce
The caller ID announce feature lets you know who’s calling without having to
look at the display.
To turn on or off the caller ID announce feature:
1. Press
MENU/SELECT in idle mode to enter the main menu.
2. Use
qCID or pDIR to scroll to Settings, then press MENU/SELECT.
3. Use
qCID or pDIR to scroll to Caller ID annc, then press MENU/SELECT.
4. Use
qCID or pDIR to highlight the desired option, then press MENU/SELECT.
Set all On/Off - Change the setting for the base and all handsets.
Base - Change the setting for the telephone base only.
5. Use qCID or pDIR to highlight On or Off, then press MENU/SELECT.
NOTES:
To use the caller ID announce feature, you must subscribe to caller ID service from your telephone
service provider.
Pronunciation of names may vary with this feature. Not all names may be pronounced correctly
Set speed dial voicemail number
This feature lets you save your voicemail number for easy access when you
press and hold the 1 key.
To save your voicemail number:
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Use
qCID or pDIR to scroll to Settings, then press MENU/SELECT.
3. Use
qCID or pDIR to scroll to Voicemail #, then press MENU/SELECT.
4. Use the dialing keys to enter the voicemail access number provided by your
telephone service provider (up to 30 digits) when prompted.
Press qCID or pDIR to move the cursor to the left or right.
Press X/DELETE on the telephone base to erase a digit.
Press and hold X/DELETE on the telephone base to erase all digits.
Press REDIAL/PAUSE to enter a three-second dialing pause
(a p appears).
5.
Press MENU/SELECT to save.
•
•
•
•
•
•
•
•
To Next Page
Loading...
Need help?
General
