Multiple handset use
32
Push-to-talk (PTT)
Answer a PTT call
You can respond to a PTT call, as described below.
When your device receives a PTT call, it beeps and shows Press and hold
[PTT] to talk.
When the other party is speaking, your speakerphone light is on, and your
device shows:
PTT From HS X To HS X (the first X represents the initiating handset
number, and the second X represents your handset number; a maximum
of four handset numbers appear).
-OR-
PTT From HS X To Base & HS X (the first X represents the initiating
handset number, and the second X represents your handset number; a
maximum of four handset numbers appear).
-OR-
PTT From Base To HS X (the X represents your handset number; a
maximum of five handset numbers appear).
When your speakerphone light is off (the screen shows Press and hold [PTT]
to talk), press and hold PUSH TO TALK on your handset or PTT on your
telephone base. You will hear a chirp. Speak towards the device.
While you are speaking, your device shows PTT To Handset: X
(X represents the handset numbers of one or more destination handsets; a
maximum of five handset numbers appear) or PTT To Base & Handset: X
(X represents the handset numbers of one or more destination handsets; a
maximum of four handset numbers appear).
Your voice is broadcast to all destination devices.
After speaking, release PUSH TO TALK on your handset or PTT on your
telephone base. Your device will beep. After the beep, if your speakerphone
light is off, you can press and hold PUSH TO TALK on your handset or PTT
on your telephone base to continue speaking, or the destination device
can respond.
1.
2.
•
•
•
3.
•
•
To Next Page
Loading...
Need help?
General
