Multiple handset use
29
Intercom
Using the telephone base:
1. Press MENU/SELECT in idle mode to enter the main menu. Press qCID or
pDIR to scroll to Intercom, then press MENU/SELECT.
If you have one handset, the telephone base shows Calling HANDSET X.
If you have more than one handset, the telephone base shows INTERCOM
TO: Use the dialing keys to enter a specific handset number (1-9 for
handsets 1-9, TONE followed by 0-2 for handsets 10-12, or TONE
followed by # for all handsets), or press qCID or pDIR to scroll to the
desired handset and press MENU/SELECT. The telephone base shows
Calling HANDSET X or Calling all handsets.
The destination handset(s) rings and shows Base is calling, BASE 0 is
calling or BASE 0 is calling all.
2. To answer the intercom call, press
PHONE/FLASH, /SPEAKER or any
dialing key (0-9, TONE or #) on the destination handset. Both the base and
the handset now show Intercom.
3.
To end the intercom call, one party presses OFF/CANCEL, or places the
handset back in the telephone base or charger; or presses CANCEL on the
telephone base. The other party hears four beeps. Both devices display
Intercom ended.
•
•
To Next Page
Loading...
Need help?
General
