Answering system
48
Message playback
When messages are playing on the handset:
Press qCID/VOLUME or pDIR/VOLUME to adjust the message
playback volume.
Press EQ to adjust the message playback audio quality.
Press 6 to skip to the next message.
Press 4 to repeat the message. Press twice to hear the previous message.
Press MUTE/DELETE to delete the message.
Press 5 or OFF/CANCEL to stop playback.
Press /SPEAKER to switch between speakerphone mode and
handset mode.
Press PHONE/FLASH to stop playback. The screen shows Call back?, then
press MENU/SELECT, PHONE/FLASH, or /SPEAKER to call back the caller
if the caller’s number is available. If the dialing format used is not correct,
then use the option, as mentioned below, to choose the correct dialing
format before calling back the caller.
Press MENU/SELECT to pause playback and show the caller ID information
if available. From here, you can press OFF/CANCEL to resume playback,
or press # (pound key) repeatedly to show the desired dialing option, then
press PHONE/FLASH to call back the caller. If you do not call back within
ten seconds, message playback resumes automatically.
•
•
•
•
•
•
•
•
•
To Next Page
Loading...
Need help?
General
