Answering system
Answering system settings
To record a new outgoing announcement:
Using a cordless handset or the telephone base:
1. When the handset is in idle mode, press MENU/SELECT to enter the
main menu.
2. Press qCID or pDIR to scroll to Answering sys, then press MENU/SELECT.
3. Press MENU/SELECT again to select Announcement.
4. Press MENU/SELECT to select Record annc. The system
announces, “Record after the tone. Press 5 when you
are done.”
5. Speak towards the handset to record your
announcement. Press 5 to end recording. Your recorded
announcement plays.
To listen to the recorded announcement again, scroll to
Play annc and press MENU/SELECT.
>Record annc
Play annc
>Record annc
Play annc
118
To Next Page
Loading...
