AT&T CL83207 User Manual

Multiple handset use
Handset locator
The handset locator feature is useful if you
misplace any handsets.
To start the paging tone:
f Press /FIND HS on the telephone base to
start the paging tone on all handsets for 60
seconds.
Note: If you press OFF/CANCEL or MUTE/DELETE on a
handset, the ringer of that handset stops, but the paging to the rest of the handsets
continues.
To stop the paging tone:
f Press PHONE/FLASH, /SPEAKER, or any dialing
key (0-9, TONE or #) on the handset(s).
-OR-
f Press /FIND HS or CANCEL on the telephone base.
Join a call in progress
When a handset or the telephone base is already on a call and you would like
to join the call, press PHONE/FLASH or /SPEAKER on your handset or
/SPEAKER on your telephone base.
To end the call using a handset, press OFF/CANCEL or place the handset in
the telephone base or charger. To end the call using the telephone base,
press /SPEAKER. The call does not end until all handsets and the telephone
base hang up.
Note: You can use up to four system handsets and the telephone base at the same time on an outside call.
49
Multiple handset use
**Paging**

AT&T CL83207 Specifications

General

Color	silver/black
Speakerphone	yes
Expandable	yes
Volume Control	yes
Intercom	yes
Incoming Lines	1
Dialing Mode	pulse, tone
Record Time	22 minutes
Display Type	lcd
Caller ID	yes
Call Waiting	yes
Answering System	yes
Flash Function	no
Conference Call	yes
Conference Call Capability	yes
Caller ID Memory	50 gigabytes
Phone Book Memory	50 gigabytes
Handsets	yes
Expansion Base Stations	1
Expansion Handsets	2, 12
Backlit Keypad	yes
Frequency	dect 6.0 digital