Caller ID
78
Caller ID operation
Save a caller ID log entry to the allow list
1. When in the caller ID log, press qCID or pDIR to browse.
2. When the desired entry displays, press MENU/SELECT.
3. Press qCID or pDIR to scroll to Allow list, then press MENU/SELECT.
4. When the screen displays EDIT NUMBER, use the dialing keys to edit the
number.
f Press qCID or pDIR to move the cursor to the left or right.
f Press MUTE/DELETE to backspace and erase a digit.
f Press and hold MUTE/DELETE to erase the entire entry.
f Press and hold REDIAL/PAUSE to insert a three-second dialing pause (a
p appears).
5. Press MENU/SELECT to move to the name.
6. When the screen displays EDIT NAME, use the dialing keys (page 64) to
edit the name.
f Press qCID or pDIR to move the cursor to the left or right.
f Press 0 to add a space.
f Press MUTE/DELETE to erase a character.
f Press and hold MUTE/DELETE to erase all characters.
f Press TONE to change the next letter to upper or lower case.
f Press # (pound key) to move the last word to the front. For example,
Johnson Charlie becomes Charlie Johnson when you press # (pound
key).
7. Press MENU/SELECT when done. The screen shows Saved to allow list.
Save a caller ID log entry to the block list
1. When in the caller ID log, press qCID or pDIR to browse.
2. When the desired entry displays, press MENU/SELECT.
3. Press qCID or pDIR to scroll to Block list, then press MENU/SELECT.
4. When the screen displays EDIT NUMBER, use the dialing keys to edit the
number.
f Press qCID or pDIR to move the cursor to the left or right.
f Press MUTE/DELETE to backspace and erase a digit.
f Press and hold MUTE/DELETE to erase the entire entry.
f Press and hold REDIAL/PAUSE to insert a three-second dialing pause (a p
appears).