35
Telephone settings
Telephone base settings
Rename base
You can edit the name for the telephone base.
1. When the telephone is idle, press MENU/SELECT.
2. Use qCID or pDIR to scroll to Settings, then press
MENU/SELECT.
3. Use qCID or pDIR to scroll to Rename base, then press
MENU/SELECT.
4. Change the telephone base name when prompted.
f Press qCID or pDIR to move the cursor to the le
or right.
f Use the dialing keys to enter a name (up to 11 characters). Each time
you press a key, a character on that key appears. Additional key presses
produce other characters on that key. See the chart on page 64.
f Press MUTE/DELETE to backspace and delete a character.
f Press and hold MUTE/DELETE to delete all characters.
5. Press MENU/SELECT to save the setting and return to the previous menu.
There is a conrmation tone.
Key tone
The telephone base is set to beep with each key press. You can adjust the
key tone volume or turn it o. If you turn o the key tone, there are no beeps
when you press keys.
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Use qCID or pDIR to scroll to Settings, then press
MENU/SELECT.
3. Use qCID or pDIR to scroll to Key tone, then press
MENU/SELECT.
4. Use qCID or pDIR to select the desired volume
or O.
5. Press MENU/SELECT to save your preference. There
is a conrmation tone and the screen returns to the
previous menu.
Rename base
>
Key tone
KEY TONE
Clr voicemail
>
Rename base
RENAME BASE
BASE_______
To Next Page
Loading...
Need help?
General
