18
Handset settings
Ringer volume
You can set the ringer volume level to one of six levels or turn
the ringer o. When the ringer is o, appears on the screen.
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Use qCID or pDIR to scroll to Ringers, then press
MENU/SELECT.
3. Press MENU/SELECT again to select Ringer volume.
4. Press qCID or pDIR to sample each volume level.
5. Press MENU/SELECT to save your preference. There is a
conrmation tone and the screen returns to the previous menu.
Notes:
f The handset ringer volume also determines the ringer volume for intercom calls.
f If the ringer volume is set to off, that handset is silenced for all incoming calls.
f If the ringer volume is set to off, the caller ID will not be announced and the screen will briefly display Caller ID won’t be
announced.
Ringer tone
You can choose one of ten ringer tones.
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Use qCID or pDIR to scroll to Ringers, then press
MENU/SELECT.
3. Press qCID or pDIR to scroll to Ringer tone, then press
MENU/SELECT.
4. Press qCID or pDIR to sample each ringer tone.
5. Press MENU/SELECT to save your preference. There is
a confirmation tone and the screen returns to the
previous menu.
Note: If you turn off the ringer volume, you will not hear ringer tone samples.
RINGER TONE
>
Tone 1
>
Ringer tone
Ringer volume
>
Ringer volume
Ringer tone
>Ringers
Intercom
RINGER VOLUME
Telephone settings
To Next Page
Loading...
Need help?
General
