Directory
Create directory entries
Create a new directory entry
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Press qCID or pDIR to scroll to Directory, then press
MENU/SELECT.
3. Press qCID or pDIR to highlight Add contact.
4. Press MENU/SELECT.
5. Use the dialing keys to enter a telephone number (up to
30 digits) when prompted.
f Press qCID or pDIR to move the cursor to the le
or right.
f Press MUTE/DELETE on the handset or the telephone
base to erase a digit.
f Press and hold MUTE/DELETE on the handset or the
telephone base to erase all digits.
f Press and hold REDIAL/PAUSE to enter a three-second
dialing pause (a p appears).
-OR-
Copy a number from the redial list by pressing
REDIAL/PAUSE, then qCID, pDIR, or pressing
REDIAL/PAUSE repeatedly to locate the number. Press
MENU/SELECT to copy the number.
6. Press MENU/SELECT to move on to the name.
f The display shows Number already saved if the
numberis already in the directory. You cannot save the
same number twice.
7. Use the dialing keys to enter a name (up to 15 characters)
when prompted. Each time you press a key, the character
on that key appears. Additional key presses produce other
characters on that key.
See the chart on next page.
f Press qCID or pDIR to move the cursor to the le or right.
f Press 0 to add a space.
f Press MUTE/DELETE on the handset or the telephone base to erase a
character.
f Press and hold MUTE/DELETE on the handset or the telephone base to
erase all characters.
f Press TONE to change the next letter to upper or lower case.
ENTER NAME
Robert Brown_
Saved
ENTER NUMBER
888-883-2445
_
Review
>Add contact
Answering sys
>Directory
63
Directory
To Next Page
Loading...
