Multiple handset use
Push-to-talk (PTT)
Answer a PTT call
You can respond to a PTT call, as described below.
1. When your device receives a PTT call, it beeps and shows Press and hold
[PTT] to talk.
2. When the other party is speaking, your speakerphone light is on, and your
device shows:
f PTT From HS X To HS X (the rst X represents the initiating handset
number, and the second X represents your handset number; a maximum
of four handset numbers appear).
-OR-
f PTT From HS X To Base & HS X (the rst X represents the initiating
handset number, and the second X represents your handset number; a
maximum of four handset numbers appear).
-OR-
f PTT From Base To HS X (the X represents your handset number; a
maximum of ve handset numbers appear).
3. When your speakerphone light is o (the screen shows Press and hold
[PTT] to talk), press and hold PUSH TO TALK on your handset or
FLASH/PTT on your telephone base. You will hear a chirp. Speak towards
the device.
f While you are speaking, your device shows PTT To Handset: X
(X represents the handset numbers of one or more destination
handsets; a maximum of ve handset numbers appear) or
PTT To Base & Handset: X (X represents the handset numbers of one or
more destination handsets; a maximum of four handset numbers appear).
f Your voice is broadcast to all destination devices.
Aer speaking, release PUSH TO TALK on your handset or FLASH/PTT
on your telephone base. Your device will beep. Aer the beep, if your
speakerphone light is o, you can press and hold PUSH TO TALK on your
handset or FLASH/PTT on your telephone base to continue speaking, or the
destination device can respond.
59
To Next Page
Loading...
Need help?
General
