AT&T CL83207 User Manual

Answering system
Remote access
You can reach your answering system remotely by dialing your home
telephone number from any touch-tone telephone.
To remotely reach your answering system:
1. Dial your telephone number from any touch-tone telephone.
2. Once the system answers, enter the two-digit remote access code (19 is
the default code. See page 124 to change it).
f The system automatically announces the number of new or old
messages (if any), and then begins to play them.
3. You can also enter the following remote commands:
Remote commands
1
Press to listen to all messages.
2
Press to listen to new messages only.
3
Press to delete the current message (during playback).
33
Press twice to delete all old messages.
4
Press to repeat the current message (during playback).
5
Press to stop any operation (including recording).
*
5
Press to listen to a list of remote commands.
6
Press to skip to the next message (during playback).
*
7
Press to record a new announcement.
8
Press to end remote access (the call will be terminated).
0
Press to turn the answering system on or o.
4. Hang up or press 8 to end the calls.
137

AT&T CL83207 Specifications

General

Color	silver/black
Speakerphone	yes
Expandable	yes
Volume Control	yes
Intercom	yes
Incoming Lines	1
Dialing Mode	pulse, tone
Record Time	22 minutes
Display Type	lcd
Caller ID	yes
Call Waiting	yes
Answering System	yes
Flash Function	no
Conference Call	yes
Conference Call Capability	yes
Caller ID Memory	50 gigabytes
Phone Book Memory	50 gigabytes
Handsets	yes
Expansion Base Stations	1
Expansion Handsets	2, 12
Backlit Keypad	yes
Frequency	dect 6.0 digital