36
Telephone settings
Telephone base settings
Use caller ID to automatically set date and time
If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. Follow the steps, as mentioned below,
to turn the CID time sync feature on or o. The default setting is On.
1. When the telephone base is in idle mode, press
MENU/SELECT to enter the main menu.
2. Press qCID or pDIR to scroll to Settings, then press
MENU/SELECT.
3. Press qCID or pDIR to scroll to CID time sync, then
press MENU/SELECT.
4. Press qCID or pDIR to highlight On or Off, then press
MENU/SELECT to save. There is a confirmation tone
and the screen returns to the previous menu.
Home area code
If you dial seven digits to make a local call (no area code required), enter your
area code into the telephone as the home area code. When you receive a call
from within your home area code, the caller ID log only displays the seven
digits of the telephone number.
This feature makes it easy for you to place a call from the caller ID log. If you
dial ten digits to make a local phone call, do not use this home area code
feature. If you do, you cannot place local calls from your caller ID log, as they
will have only seven digits.
To set the home area code:
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Use qCID or pDIR to scroll to Settings, then press
MENU/SELECT.
3. Use qCID or pDIR to scroll to Home area code, then
press MENU/SELECT. The screen briey shows
Only for 7digit dial from CID.
4. Use the dialing keys to enter a three-digit home area
code.
f Press MUTE/DELETE to delete a digit.
f Press and hold MUTE/DELETE to delete all digits.
5. Press MENU/SELECT to save. There is a conrmation tone and the screen
shows Area code will not show in CID briey before returning to the
previous menu.
Key tone
>CID time sync
CID TIME SYNC
>On
CID time sync
>Home area code
HOME AREA CODE
___