EasyManuals Logo

AT&T CL83207 User Manual

AT&T CL83207
179 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #156 background imageLoading...
Page #156 background image
Appendix
Troubleshooting
I cannot dial out.
f Try all the suggestions mentioned above.
f Make sure you have a dial tone before dialing. The cordless handset may
take a second or two to nd the telephone base and produce a dial tone.
This is normal. Wait an extra second before dialing.
f Eliminate any background noise. Noise from a television, radio or other
appliances may cause the phone to not dial out properly. If you cannot
eliminate the background noise, rst try muting the cordless handset
before dialing, or dialing from another room with less background noise.
f If other phones in your home are having the same problem, contact your
telephone service provider (charges may apply).
My cordless handset isnt performing normally.
f Make sure you plug the power cord securely into the telephone base. Plug the
power adapter into a dierent working electrical outlet without a wall switch.
f Move the cordless handset closer to the telephone base. You may have
moved out of range.
f Reset the telephone base. Unplug the electrical power. Wait for 15 seconds,
then plug it back in. Allow up to one minute for the cordless handset and
telephone base to reset.
f Other electronic products such as HAM radios and other DECT phones, can
cause interference with your cordless phone. Try installing your phone as
far away as possible from these types of electronic devices.
Out of range OR No pwr at base appears on my cordless handset.
f Ensure you plug the telephone base in properly and the power is on.
f Place the cordless handset in the telephone base for one minute to allow
the cordless handset and base to synchronize.
f Move the cordless handset closer to the telephone base. You may have
moved out of range.
f Reset the telephone base. Unplug the electrical power. Wait for 15 seconds,
then plug it back in. Allow up to one minute for the cordless handset and
telephone base to reset.
f Other electronic products such as HAM radios and other DECT phones, can
cause interference with your cordless phone. Try installing your phone as
far away as possible from these types of electronic devices.
149

Table of Contents

Other manuals for AT&T CL83207

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AT&T CL83207 and is the answer not in the manual?

AT&T CL83207 Specifications

General IconGeneral
Colorsilver/black
Speakerphoneyes
Expandableyes
Volume Controlyes
Intercomyes
Incoming Lines1
Dialing Modepulse, tone
Record Time22 minutes
Display Typelcd
Caller IDyes
Call Waitingyes
Answering Systemyes
Flash Functionno
Conference Callyes
Conference Call Capabilityyes
Caller ID Memory50 gigabytes
Phone Book Memory50 gigabytes
Handsetsyes
Expansion Base Stations1
Expansion Handsets2, 12
Backlit Keypadyes
Frequencydect 6.0 digital

Related product manuals