Getting started
13
Battery installation and charging
Aer you install your telephone or power returns following a
power outage, the handset and telephone base will prompt
you to set the date and time. For instructions, see Set date/
time on page 19 or page 30. To skip setting the date and
time, press
OFF/CANCEL on the handset or CANCEL on the
telephone base.
Aer the date and time setting is done or skipped, the
telephone base then prompts if you want to set Smart
call blocker. Press MENU/SELECT to start the Smart call
blocker setup via voice guide. For more details, see Voice
guide to set Smart call blocker on page 104. To skip the
setup, press CANCEL on the telephone base.
Aer the Smart call blocker setting is done or skipped,
the telephone base will then prompt if you want to set up
the answering system. Press MENU/SELECT to start the
answering system setup via voice guide. For more details,
see Voice guide to set Answering system on page 121.
To skip the setup, press CANCEL on the telephone base.
SET DATE
MM/DD/YY
SET TIME
HH:MM --
IMPORTANT INFORMATION
f Use only the supplied rechargeable battery or replacement battery (model BT183342/
BT283342). To order, visit our website at https://telephones.att.com or
call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
f If you do not use the handset for a long time, disconnect and remove the battery
to prevent possible leakage.
Voice guide to
set up Ans sys?
Voice guide set
Smart Call Blk?
To Next Page
Loading...
Need help?
General
