Multiple handset use
Intercom
Using the telephone base:
1. When the telephone base is not in use, press
MENU/SELECT to enter the main menu. Press
qCID or pDIR to scroll to Intercom, then press
MENU/SELECT.
f If you have one handset and no other registered
devices, the telephone base shows Calling
HANDSET X.
f If you have cordless headset(s)/speakerphone(s) or
more than one handset, the telephone base shows
INTERCOM TO: Use the dialing keys to enter a
specific handset number (1-9 for handsets
1-9, TONE followed by 0-2 for handsets 10-12, # for
a single headset/speakerphone, # followed by
1 or 2 for headset/speakerphone 1 or 2, or TONE followed by # for all
devices), or press qCID or pDIR to scroll to the desired handset and
press MENU/SELECT. The telephone base shows Calling HANDSET X or
Calling all handsets.
The destination device(s) rings and shows Base 0 is calling or
BASE 0 is calling all.
2. To answer the intercom call, press
PHONE/FLASH, /SPEAKER or any
dialing key (0-9, TONE , or
#
) on the destination handset. Both the base
and the handset now show Intercom.
3. To end the intercom call, one party presses
OFF/CANCEL, or places the
handset back in the telephone base or charger; or presses CANCEL on the
telephone base. The other party hears four beeps. Both devices display
Intercom ended.
Notes:
f Before the intercom call is answered, you can cancel it by pressing
OFF/CANCEL on the handset or CANCEL on
the telephone base.
f If the called device is not answered within 100 seconds, or if it is accessing the directory, caller ID log, on a call or out of
range, the initiating device shows No answer. Try again.
f To temporarily silence the intercom ringer, press
OFF/CANCEL or MUTE/DELETE on the handset, or press
CANCEL or MUTE on the telephone base.
f You can only use one pair of devices at a time to make intercom calls.
f For cordless headsets and speakerphones, refer to the corresponding user’s manual on how to answer and end an intercom call.
f If a total of two cordless headset(s) and/or speakerphone(s) are registered to the telephone base, they appear as
HEADSET 1 and HEADSET 2, respectively, in the intercom menu.
Calling
HANDSET X
Intercom
Base 0
is calling
51
To Next Page
Loading...
Need help?
General
