90
Smart call blocker
Call block settings
Save a caller ID log entry to block list:
Using a cordless handset or the telephone base:
1. Search for the desired caller ID log entry (see Review the caller ID log on
page 75).
2. When the desired entry displays, press MENU/SELECT.
3. Press qCID or pDIR to scroll to Block list, then press MENU/SELECT.
4. The handset displays EDIT NUMBER. Use the dialing keys to edit the
number, when necessary.
f Press qCID or pDIR to move the cursor to the le or right.
f Press MUTE/DELETE to backspace and erase a digit.
f Press and hold MUTE/DELETE to erase the entire entry.
f Press and hold REDIAL/PAUSE to insert a three-second dialing pause (a p
appears).
5. Press MENU/SELECT to move to the name. The screen displays EDIT NAME.
6. Use the dialing keys to add or edit the name.
f Press qCID or pDIR to move the cursor to the le or right.
f Press 0 to add a space.
f Press MUTE/DELETE to erase a character.
f Press and hold MUTE/DELETE to erase all characters.
f Press TONE to change the next letter to upper or lower case.
f Press # (pound key) to move the last word to the front. For example,
Johnson Charlie becomes Charlie Johnson when you press # (pound
key).
7. Press MENU/SELECT when done and the screen shows Saved to block list.
To Next Page
Loading...
Need help?
General
