14
Telephone settings
Home area code
If you dial seven digits to make a local call (no area code required), enter
your area code into the telephone as the home area code. When you receive
a call from within your home area code, the caller ID history only displays the
seven digits of the telephone number.
This feature makes it easy for you to place a call from the caller ID history. If
you dial 10 digits to make a local telephone call, do not use this home area
code feature. If you do, you will not be able to place calls from your caller ID
history as they have only seven digits.
Press MENU/SELECT in idle mode to enter the main menu.
Press DIR or CID to scroll to >SETTINGS, then press MENU/SELECT.
Press DIR or CID to scroll to >HOME AREA CODE, then
press MENU/SELECT.
Press the dial pad keys to enter your three-digit area
code. Press DELETE to delete digits while entering.
Press MENU/SELECT to save the setting.
NOTE: If, in the future, your telephone service provider requires you to dial 10 digits to make
a local call (area code + telephone number), you will need to delete your home area code. While
the home area code displaying in step 4 above, press and hold DELETE. The home area code is
now restored to its default setting of _ _ _ (empty).
Dial mode
The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone.
Follow steps 1 and 2 in Home area code on this page.
Press DIR or CID to scroll to >DIAL MODE, then press
MENU/SELECT.
Press DIR or CID to select TONE or PULSE.
Press MENU/SELECT to save the setting.
NOTE: If you have pulse (rotary) dialing service only, refer to Temporary tone dialing on
page 25 to temporarily switch from pulse to touch-tone dialing during a call.
1.
2.
3.
4.
5.
1.
2.
3.
4.
Handset settings
HOME AREA CODE
___
DIAL MODE
>TONE
To Next Page
Loading...
Need help?
General
