48
Answering system
Message window displays
The message window on the telephone base displays the total number of
messages. See the table below for other message window displays.
0 There are no messages in the answering system.
0
(flashing)
After a power failure, this flashes to indicate that you need to set the date
and time.
1-99 Total number of messages and memos.
Current message number during old message playback.
•
•
1-99
(flashing)
Total number of new messages and memos. The number flashes when
there are new messages that have not been reviewed.
Current message number during new message playback.
After a power failure, the number in the message window flashes to
indicate the date and time need to be set.
•
•
•
1-99 and F
(alternating)
Memory is full. Messages must be deleted before new messages can
be recorded.
-- The answering system is being programmed by the handset.
The answering system is answering a call or recording a memo
or announcement.
The answering system is being accessed remotely.
•
•
•
0-5 Telephone base ringer volume while adjusting.
1-8 Telephone base speaker volume while adjusting.
To Next Page
Loading...
Need help?
General
