33
Directory
Speed dial locations
To assign or reassign a directory entry to a speed dial location
Press MENU/SELECT in idle mode.
Press DIR or CID to scroll to >DIRECTORY. Press
MENU/SELECT.
Press DIR or CID to scroll to >SPEED DIAL. Press
MENU/SELECT.
To assign a speed dial location, press DIR or CID to
scroll to an empty speed dial location.
-OR-
To reassign a speed dial location, press DIR or CID to
scroll to the desired speed dial location.
Press MENU/SELECT to show the directory.
Press DIR or CID to browse through the directory and
find the desired entry.
-OR-
Use the alphabetical search to find the desired entry.
Refer to steps 2 and 3 in To search by name on page 31.
Press MENU/SELECT to confirm. The name (up to 12
characters) of the desired directory entry appears in the
selected speed dial location.
NOTES:
If the directory is empty, when you press MENU/SELECT in step 5, the screen shows
DIRECTORY EMPTY.
If the speed dial location you selected is occupied, the new directory entry you selected
replaces the old one. Take caution not to replace entries you do not wish to delete from the
speed dial locations.
To clear a speed dial location
Follow steps 1 through 3 in To assign or reassign a
directory entry to a speed dial location on this page to
enter the speed dial list.
Press DIR or CID to scroll to a speed dial location.
Press DELETE to clear the selected speed dial location.
<EMPTY> appears in that speed dial location.
NOTE: Clearing the speed dial locations does not affect the entries in
the directory.
1.
2.
3.
4.
5.
6.
7.
•
•
1.
2.
3.
>SPEED DIAL
REVIEW
>0: <EMPTY>
1: Robert Brown
Charlie Johnson
888-883-2445
>0: Charlie John
1: Robert Brown
Charlie John
UNASSIGN?
>0: <EMPTY>
1: Robert Brown
To Next Page
Loading...
