AT&T EL52100 - Redial Functionality; Reviewing and Calling from Redial List; Saving Redial Entries to Directory

22
Telephone operation
Redial
The handset stores the 20 numbers most recently called in the redial list.
To review numbers in the redial list
Press REDIAL/PAUSE in idle mode.
Press DIR or CID, or press REDIAL/PAUSE repeatedly
to scroll through the 20 recently called numbers (up
to 30 digits each). The handset beeps twice at the
beginning or end of the list.
Press OFF/CLEAR to exit the redial list.
NOTE: If you access an empty redial list, the handset sounds an error tone.
To call a number from the redial list
With the desired number from redial displaying, press
PHONE/FLASH or SPEAKER to dial (known as
Display Dial).
-OR-
Press PHONE/FLASH or SPEAKER and then wait for
the dial tone.
Press REDIAL/PAUSE. The screen shows the number most
recently called. If it is not the desired number, press DIR
or CID to scroll to the desired number.
Press MENU/SELECT. The handset dials the displayed
number.
NOTE: If you access an empty redial list, the handset sounds an
error tone.
To copy a number from the redial list to the directory
While reviewing the desired number in the redial list,
press MENU/SELECT twice to edit the telephone number.
Refer to step 5 in To create a new directory entry on
page 29.
Press MENU/SELECT to add the name. Refer to step 7 in
To create a new directory entry on page 29.
Press MENU/SELECT to store your new directory entry. The
handset shows SAVED and sounds a confirmation tone.
1.
2.
3.
•
1.
2.
3.
1.
2.
3.
REDIAL
888-722-7702
EDIT NUMBER
888-722-7702_
EDIT NAME
_