25
Telephone operation
Options while on calls
Temporary tone dialing
If you have pulse (rotary) dialing service only, you can temporarily switch
from pulse to touch-tone dialing during a call.
During a call, press TONE . Buttons pressed after this
send touch-tone signals.
Use the dial pad keys to enter the number.
The telephone automatically returns to pulse dial mode
after you end the call.
Chain dialing
While on a call, you can initiate a dialing sequence from numbers stored in the
directory, caller ID history or redial list. Doing this can be useful if you need to
access numbers other than telephone numbers (such as bank account numbers
or access codes).
To access the directory while on a call:
Press MENU/SELECT.
Press DIR or CID to scroll to >DIRECTORY, then
press MENU/SELECT.
Press DIR or CID to scroll or press the dial pad keys
(0 through 9) to find the desired entry (see
To search by name on page 31).
Press MENU/SELECT. The telephone automatically dials
the displayed number.
To access the caller ID history while on a call:
Press MENU/SELECT.
Press DIR or CID to scroll to >CALL LOG, then press
MENU/SELECT.
Press DIR or CID to scroll to the desired entry. To
view the dialing options, press # (see To view the
dialing options on page 38).
Press MENU/SELECT. The telephone automatically dials
the displayed number.
1.
2.
3.
•
1.
2.
3.
4.
•
1.
2.
3.
4.
>DIRECTORY
CALL LOG
Charlie Johnson
888-883-2445
11/20
ROBERT BROWN
800-360-4121
8:30
PM
11/20
PHONE 0:01:30
888-722-7702
10:30
PM
To Next Page
Loading...
Need help?
General
