AT&T EL52100 User Manual

20
Making, answering and ending a call
Making a call
To make a call:
Press PHONE/FLASH, then wait for the dial tone.
-OR-
Press SPEAKER to use the speakerphone, then wait
for the dial tone.
Use the dial pad keys to enter the telephone number.
On-hook dialing (predialing):
Use the dial pad keys to enter the telephone number
(up to 30 digits).
Press and hold REDIAL/PAUSE to insert a three-second
dialing pause (a P appears).
Press DELETE or OFF/CLEAR to make corrections.
Press PHONE/FLASH to call.
-OR-
Press SPEAKER to call using the speakerphone.
-OR-
Press and hold OFF/CLEAR to return to idle mode.
NOTE: Pressing PHONE/FLASH to access services from your telephone service provider
does not affect the elapsed time.
Temporary ringer silencing
To silence the ringer temporarily on the handset only:
While the telephone is ringing, press OFF/CLEAR or
MUTE.
To silence the ringer temporarily on the telephone base:
While the telephone is ringing, press VOLUME on the telephone base.
This turns off the ringer without disconnecting the call. The next incoming
call rings normally at the preset volume.
1.
2.
1.
•
•
2.
•
•
11/20
PHONE 0:01:30
888-722-7702
10:30
PM
The screen displays the
elapsed time as you
talk (in hours, minutes
and seconds).
RINGER MUTED
888-722-7702
Telephone operation

AT&T EL52100 Specifications

General

Brand	AT&T
Model	EL52100
Category	Cordless Telephone
Language	English