Using and Programming Features
Programming Features
Your company may have already labeled and programmed
features onto line buttons. You can program any unlabeled
line buttons with the features of your choice by using feature
codes.
Before you begin programming features, remove the clear
plastic that covers the button labeling card and write in the
name of the features next to the buttons to be programmed.
Replace cover with the textured side up.
1. Press Feature and dial 00.
2. Press the button you labeled.
3. Dial the programming code (listed in the card tray or in
Appendix C).
Some features require additional entries. For example, you must
enter an extension for inside Auto Dial.
4. Press Feature again and dial ✱ 0 0.
To use the feature, simply press the programmed button.
Programming Features 3-5
To Next Page
Loading...
Need help?
General
