Quick Start
Setting Up a Conference
You can conference up to five people on the same
conversation: one or two outside numbers and up to three
extensions, including your own.
1.
Make a call to the first extension or outside number.
2.
Press Conference after the person answers and you
have announced the call.
The green light next to the line button flashes, signaling that the tail
is on hold for the conference.
3.
If the next call is an inside extension, press an ICOM or
SA button; if it is an outside number, press an SA or
line button.
NOTE:
If you have SA buttons and any are available, the
system selects one automatically for you.
4. Dial the next extension or outside number.
NOTE:
If you make a dialing error while adding a
participant to a conference, you must hang up and
restart the procedure to add a participant,
beginning with Step 3.
Setting Up a Conference
2-11
To Next Page
Loading...
Need help?
General
