Features
Recall
Depending on how your system is set up, you may be able to
use the Recall button to disconnect from one call and get a
new inside or outside dial tone without hanging up. If you
make a mistake, press Recall and begin dialing again.
If you are able to use Recall on your system, you can use it
when you are on a call on an outside line button, or on an
inside or outside call on an SA or ICOM button. Recall works
only on certain kinds of outside lines. Ask your system
manager if Recall works for outside lines on your phone.
To Program a Recall Button
1. Label the button to be programmed as Recall.
2. Press Feature and dial 00.
3. Press the button you labeled Recall.
4. Dial ✱ 775.
5. Press Feature and dial ✱ 00.
To Use Recall
1. Press Recall (don’t hang up).
2. Wait for the dial tone (or another confirmation tone,
depending on your system).
Recall
5-59
To Next Page
Loading...
Need help?
General
