Features
Park
If your co-worker doesn’t answer when you transfer a call, use
Park to hold the call while you page him or her.
When you park a call on your phone, you are putting it on
hold so it can be answered from any phone in the system.
You then page your co-worker and announce the call. (See
Paging.) Your co-worker can pick up the call from the nearest
phone by using Pickup and dialing your extension. (See
Pickup.)
Unanswered parked calls ring back at your phone within 30
seconds to 5 minutes, depending on how your system is
programmed.
To Program a Park Button
1. Label the button to be programmed as Park.
2. Press Feature and dial 00.
3. Press the button you labeled Park.
4. Dial ✱ 86.
5. Press Feature and dial ✱ 00.
5-48
Park
To Next Page
Loading...
Need help?
General
